Skip to content
Artdeshine

Frequently asked questions

Technical questions about graphene and ceramic coating chemistry, answered plainly.

Graphene is expensive — how can it be used in affordable coatings?

Pure graphene is costly, but our coatings use graphene-based additives (graphene oxide and carbon nanotubes) that are effective in very small quantities, not sheets of pure graphene.

How do graphene additives work inside a silicone coating?

The additives are processed into nano-sized particles under 1 micron (a human hair is about 50 microns) and dispersed through the silicone polymer base. The coating itself is not made of graphene — graphene additives are suspended within it.

What's the difference between "ceramic" and "graphene" coatings?

Most protective coatings, regardless of marketing name (glass, ceramic, quartz, crystal), are built on similar silicon-based polymers and silanes containing SiO2. Our graphene coatings use the same base chemistry, with graphene additives blended in — some of our own products are also described as ceramic coatings.

Ceramic coatings are known for being hard — how do Artdeshine coatings compare?

Hard ceramic coatings are typically cured into a glass-like, rigid finish. Artdeshine coatings are cured into a softer, more flexible material by design, using different silicone polymers and curing agents for specific functional properties, without sacrificing durability.

Does a softer coating mean less scratch resistance?

Not necessarily. A coating's resistance to scratching depends much more on surface slickness and reduced friction than on hardness or thickness — any hand-applied coating layer is too thin for hardness alone to meaningfully prevent scratches.

What do "9H scratch resistance" and the Mohs hardness scale actually mean?

9H refers to the pencil grade used in a scratch test that measures abrasion resistance; Mohs is a separate mineral hardness scale. Terms like "9H hardness" mix the two and don't correspond to a single standardized measurement. Artdeshine coatings, while softer than glass-like coatings, still pass a 9H pencil scratch test as a cured sample thanks to their low surface friction.

Do graphene additives increase hydrophobic (water-repelling) properties?

It depends on the additive. Graphene oxide isn't specifically engineered for water repellency, but carbon nanotubes improve the coating's anti-static behavior, which in turn helps its repellent properties.

Do graphene additives increase hardness or abrasion resistance?

Most of a coating's hardness comes from its silicone polymer base, and its abrasion resistance from low surface friction. Graphene oxide has little effect on hardness; carbon nanotubes have been shown to improve it.

Is the coating a single atom-thick layer of graphene on the surface?

No. The coating is fundamentally a silicone polymer coating, with graphene additives dispersed through the cured polymer matrix, not a standalone graphene layer.

Do graphene additives make a surface feel slicker or smoother?

Slickness mainly comes from the type of silicone polymer used (a PDMS variant). Graphene oxide has little direct effect here, though carbon nanotubes can improve surface smoothness, which is a different property from the sensation of slickness.

Does graphene oxide increase gloss or reflectivity?

No — gloss and reflectivity depend on the polymer used, not the graphene additive. Coatings cured hard and glass-like (typical "ceramic" coatings) tend to look highly reflective; our softer-cured coatings are optically clear on the surface but slightly less glossy, while enhancing color depth and saturation.

What percentage of the coating is actually graphene?

Since our coatings aren't made from graphene itself but use it only as an additive, this isn't a meaningful performance indicator. For transparency: coatings with graphene oxide additives contain roughly 100 ppm (0.00005–0.0001% by weight) of nano-sized GO, while coatings with carbon nanotube additives range from 100–1000 ppm.